The counter reset procedure Canon MP170 printer does not vary much with relation to the Canon models MP In case you need to r eset canon MP170 printer, here describes the solution in two different situations, a more straightforward than the other but equally effective to continue using our printer canon MP170 normally.

Method to reset a Canon MP170 printer: If you display the message that the cartridges are empty. First you send a print, and a message appears “the cartridges are empty” Now you hold the button for 10 seconds RESUME / CANCEL RESET / CANCEL “Start cleaning cycle, then we will print normally, this error message is displayed usually after installing a new ink cartridge, or if we had these cartridges refilled. Method 2 to reset Canon MP170 printer: if you have Full ink counter this procedure if you do not work above, which, like can be problems when you print to change the ink cartridge. Turns printer Press the ON / OFF button while pressing the STOP / RESET “STOP / RESET” (contains a circle with an inverse triangle) without releasing the ON / OFF when the LED turns green, you must release the STOP / RESET and press it twice Release both buttons, the printer is in “SERVICE MODE” “service mode” When the LED ON / OFF turns green, press the STOP / RESET Switch off the printer four times twice pressing ON / OFF Turn the printer back ON / OFF, the lights remain flashing orange. .